Innovative products

USB Multimeter

Approx Price: Rs 5,000 / Piece 
Minimum Order Quantity: 1 Piece
We deal with advanced multimeter with PC interface ( USB option)
It seems like everything plugs in to your computer these days, and this digital multimeter is no exception. This auto-ranging multimeter will test AC and DC voltage and current as well as capacitance, resistance, frequency and even temperature. It features a large, easily readable display for use in the field as well as the ability to connect to your computer for data logging, processing and analysis. It has all of the basic functions that you expect from a good digital multimeter including continuity check (with buzzer), diode test and data hold. Data logging and analysis software is included on a mini-CD and you can also download it below.

Note: The included CD contains all versions of the software. The version that has been tested to work with this unit is version 3.0. You can also just use the download link below.

Note: This meter does have a USB interface, but it's not clearly RS232. The meter needs the proprietary software to function and you cannot simply read the data directly without a driver and the software.

Dimensions: 200 x 90 x 45mm


  • Auto-Ranging
  • Shockproof Protection
  • Input Impedance: 10MΩ
  • Relative Value Measurement
  • 70×50mm LCD Display
  • AC Frequency response: 40-400 Hz
  • DC Voltage Ranges: 400mV/4V/40V/400V/1000V ±(0.5%+4)
  • AC Voltage Ranges: 400mV/4V/40V/400V/750V ±(0.8%+10)
  • DC Current Ranges: 30mA/300mA/10A ±(1.5%+10)
  • AC Current Ranges: 30mA/300mA/10A ±(1.5%+10)
  • Resistance Ranges: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+4)
  • Capacitance Ranges: 4nF/40nF/400nF/4uF/40uF/200uF ±(3.5%+8)
  • Frequency Ranges: 100Hz/1000Hz/10kHz/100kHz/1MHz/30MHz ±(0.5%+10)


  • User Manual
  • Test Leads
  • Temperature Probe
  • 2 x "AAA" 1.5V Batteries
  • Software CD
  • USB Cable


  • User Manual
  • Software

Additional Information:
  • Item Code: BE20275

Solar Power Supply

Approx Price: Rs 2,500 / Piece 
Minimum Order Quantity: 1 Piece
Solar Charger and Battery Pack - 3500mAh

Description: This solar charged battery pack is the size of a cell phone but packs a 0.6W solar cell, charging circuit, boost converter and 3500mAh of Lithium Polymer storage. Simply leave the battery pack with the solar panel facing up and when you need power, press the power button and dial over to the voltage you need. The unit has 9V/1A output as well as 5V output at either 1 or 2 Amps. We enjoy this product, and the young lady in the datasheet seems to thoroughly enjoy it!

A standard USB-A type connector makes it easy to plug this thing into your favorite device and mini-B port can be used to charge the pack when you don't have access to (or patience for) solar power.

Note: Although the datasheet shows an assortment of nice proprietary cell phone connectors for you to throw away, we've saved you the trouble by ordering these units without the connector pack. You'll only receive the unit itself. You probably have a USB cable laying around somewhere, don't you? If not, check the related products below.

Dimensions: 65 x 115 x 12mm

Additional Information:
  • Item Code: BE20276

Illuminated Eye Loupe

Approx Price: Rs 600 / Piece 
Minimum Order Quantity: 1 Piece
Illuminated LED Eye Loupe

Description: When working with small parts, sometimes you need magnification and some extra
light. This is a monocle we use regularly in our production facility. It has a 10x lens with a
working distance of about 1-1/2". This product is very similar to our illuminated monocle
magnifier, but there is no attached aluminum-core headband.

This loop magnifier set itself apart in our eyes because of the little LED on the side. Trying to
view SMD connections is hard enough - the LED on the side is a huge help for those close up
inspections. The LED provides sufficient light at the working distance.
LED battery comes installed.

Additional Information:
  • Item Code: BE70013

SMD Tester

Approx Price: Rs 1,500 / Piece 
Minimum Order Quantity: 1 Piece
Description: This smart SMD tester is essentially a pair of multimeter tweezers. This allows you
to troubleshoot circuits with small SMD parts without having to fumble with large probes or long
wires. Test resistors, capacitors and diodes one-handed!

  • Resistance Range: 300Ω/3KΩ/30KΩ/300KΩ ±(1.0%+5) 3M/30MΩ ±(2%+5)
  • Capacitance Range: 3n/30n/300n/3μ/30μ/300μF ±(3%+5) 3000μ/30000μF ±(5%+5)
  • Powered by One CR2032 Button Cell Battery
  • Unit Symbol Display
  • Weighs only 68g
  • Auto Range
  • Auto Scan

Additional Information:
  • Item Code: BE70016

Banana To IC Hook Cables

Approx Price: Rs 500 / Piece 
Minimum Order Quantity: 1 Piece
Banana to IC Hook Cables
Description: These are various leaded cables for attaching to multimeters, power supplies,
oscilloscopes, function generators, etc. Cables come in red/black pairs.
Dimensions: 36" Long

Additional Information:
  • Item Code: BE70008

150W DC-DC Boost Power Supply 10-32v

Approx Price: Rs 500 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Features:Module Properties: non-isolated step-up module (BOOST)Input voltage: 10-32VOutput voltage: 12-35V (adjustable)Output Current: 10A (MAX)Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)Output power: Natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)Easy to drive 65W 90W dual-core notebook.Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°cConversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)Output Ripple: 2% (MAX) 20M-bandwidthOperating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°C, lower power use, or to enhance heat dissipation)Full load temperature rise: 45°CNo-load current: 25mA typicalVoltage regulation: ± 0.5Dynamic response speed: 5% 200uSShort circuit protection: None (Please Install fuses and protection circuits at Input port.)Input Reverse Polarity Protection: None (Please Series diode at the input port.)

Additional Information:
  • Item Code: BE60122
  • Port of Dispatch: COIMBATORE

220V 2000W Speed Controller SCR Voltage Regulator Dimmers

Approx Price: Rs 300 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Specifications:Brand new and high quality.Applicable appliance: electric furnace, water heater, lamps, small motor, electric iron etc.Input voltage: 220V.Maximum power: 2000W.Adjustable voltage: 50-220V AC.Material: plastic, metal.Size: 4.8cm x 5.5cm x 2.7cm.

3 In 1 Laser - Light & UV

Approx Price: Rs 150 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
We deal with 3in1 pointer. 
White torch  light
UV light

Additional Information:
  • Item Code: BE60118

5.8V Solar Panel

Approx Price: Rs 350 / Piece 
Minimum Order Quantity: 1 Piece
5.8 V Solar panel

Additional Information:
  • Item Code: BE60083

8 CH Relay Board with ULN2003 8 Relays

Approx Price: Rs 270 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
We deal 8 channel relay unit.

Additional Information:
  • Item Code: BE30021
  • Port of Dispatch: COIMBATORE

Alligator Clip with Pigtail (4 Pack)

Approx Price: Rs 310 / Piece 
Minimum Order Quantity: 1 Piece

This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to.

Each Alligator Clip with Pigtail cable has a wire length of 30cm (that’s a little less than 1ft) and a male pin that easily inserts into a standard 0.1" connector. Each pack consists of two red cables and two black cables.

Additional Information:
  • Item Code: BE70037

BNC to IC Hook Cable

Approx Price: Rs 620 / Piece 
Minimum Order Quantity: 1 Piece

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc.

Dimensions: 36" Long

Additional Information:
  • Item Code: BE70039

Battery Holder - 9V Drawer (Panel Mount)

Approx Price: Rs 565 / Piece 
Minimum Order Quantity: 1 Piece
This panel-mount 9V battery holder is perfect for projects where you have limited panel space but still need to get to your battery to change it. Simply install this battery drawer and your 9V battery will hide out of harms way. Mounts with two screws in the front (not included) and wires in with two solder tabs on the back.

Additional Information:
  • Item Code: BE70042

Battery Holder 2xAA with Cover and Switch

Approx Price: Rs 115 / Piece 
Minimum Order Quantity: 1 Piece

This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.

The leads are about 150mm, and the last 5mm of them are tinned.

Dimensions: 67.9 x 32.8 x 18.25mm

Additional Information:
  • Item Code: BE70041

Battery Holder 3xAA with Cover and Switch

Approx Price: Rs 155 / Piece 
Minimum Order Quantity: 1 Piece

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.

The leads are about 150mm, and the last 5mm of them are tinned.

Dimensions: 68.5 x 47.5 x 19.6mm

Additional Information:
  • Item Code: BE70043

Blower - Squirrel Cage (12V)

Approx Price: Rs 500 / Piece 
Minimum Order Quantity: 1 Piece

This DC Blower really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM (although it seems like more to us). We’ve used this blower to build small hovercrafts and to cool off on a hot day, they’re also handy for inflating “transforming” e-textiles garments!


  • Rated Voltage: 6-12VDC
  • Rated Current: 1Amp
  • Rated Airflow: 16CFM
  • Rated Power: 10W
  • Outlet Diameter: 33mm
  • Fan Speed: 3000-3500rpm

Additional Information:
  • Item Code: BE70044

Coin Cell Battery Holder - 2xCR2032

Approx Price: Rs 200 / Piece 
Minimum Order Quantity: 1 Piece
This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back.

Additional Information:
  • Item Code: BE70040

Diffused LED - Orange 10mm

Approx Price: Rs 40 / Piece 
Minimum Order Quantity: 1 Piece

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.


  • 600-610nm Orange
  • 1.8-2.2VDC Forward Voltage
  • 20mA Forward Current
  • 40 degree viewing angle
  • 100-160 MCD output

Additional Information:
  • Item Code: BE70047

IC Hook Test Leads

Approx Price: Rs 930 / Piece 
Minimum Order Quantity: 1 Piece

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads.

Dimensions: 14" Long

Additional Information:
  • Item Code: BE70038

IC Hook With Pigtail

Approx Price: Rs 540 / Piece 
Minimum Order Quantity: 1 Piece
Description: These are good quality IC test hooks with a male connection wire. Instead of a
single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC
legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green).
We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own.
Wire length is 2.5" long. Male pin easily inserts into breadboard or other standard 0.1"

Additional Information:
  • Item Code: BE70006

IR Remote Control - 4 Light And 1 Fan Speed Control

Approx Price: Rs 800 / Piece 
Minimum Order Quantity: 1 Piece
1. Overview
IR Remote control is a combination of Infrared transmitter and Infrared receiver which contains 4 relays and 1 Fan Speed Control through TRIAC, which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operate the corresponding relay on the receiver board, i.e. Light 1 operates relay 1, Light 2 operates relay 2, etc. Relay contact can control any equipment in momentary mode (On till key pressed) or Latch Mode (Toggle on each key press). Each relay has indicator LED showing current status. The transmitter uses a modulated 40 kHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the receiver end the IR receiver module extracts the data signal from the carrier.
This active HIGH output is used to operate a relay via ULN2803 which is an octal transistor array.
Special Feature:
Memory backup - Memory backup saves last condition of relays if power has gone with FAN speed also.
Custom Build Remote Control with Sleek match
2. Features
Transmitter operating range up to 10 meters visible distance
Compact 3V Battery Operated Transmitter
Receiver Indicates output status by LED
Receiver operates from 12V AC (for fan speed) or DC power supply
Relay contact are brought out as Screw Terminals
3. Applications
Burglar alarm system
Smoke and fire alarm system
Garage door controllers
Car door controllers
Car alarm system
Security system
Cordless telephones
Other remote control systems
4. Specification
4.1. Transmitter
Operating Voltage: 3.0V DC Battery (Battery Not Included)
Idle Operating Current: Active Operating Current on Key Pressed: 4 mA @3.0V DC
Infrared Carrier Frequency / Duty Cycle: +/- 2% 40 kHz / 50%
Range of Operation: Approx. 10 Meters 4.2. Receiver
Operating Voltage: 12.0V DC Adapter (Adapter Not Included)
Operating Current: (All Relays Off) 15 mA @5.0VDC
Operating Current: (All Relays On) 250.0 mA @5.0V DC
Infrared Detector Frequency: 40 kHz / 50%

Additional Information:
  • Port of Dispatch: COIMBATORE

JST SH Jumper 4 Wire Assembly - 8

Approx Price: Rs 130 / Piece 
Minimum Order Quantity: 1 Piece

Description: This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.

Dimensions: 8" length

Additional Information:
  • Item Code: BE70034

LED - 10mm Cycling RGB (fast)

Approx Price: Rs 110 / Piece 
Minimum Order Quantity: 1 Piece

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations, LED “throwies”, indicator lights, etc. Typical forward voltage is 2V.

These 10mm LEDs are of the “fast-changing” variety, meaning they fade-cycle very quickly through several colors and then flash-cycle through several more colors before starting all over again.

Additional Information:
  • Item Code: BE70048

LM2577 DC-DC Converter Step-Up Power Supply Module

Approx Price: Rs 280 / Piece 
Minimum Order Quantity: 1 Piece
Specifications:Module Properties: Non-isolated step-up module Input voltage: 3-34VOutput voltage: adjustable (4-35V)Output current: 2.5A (MAX)Input current: 3A (MAX)Size: 49mm x 26mmInput mode: IN+ input positive IN- input negative Output mode: OUT+ output positive OUT- output negative Adjustment method: First, connect the correct power supply (3-34V) and then using a multimeter to monitoring output voltage and adjust the potentiometer (Chronological turn is step-down, Turn in reverse is step-up).

Additional Information:
  • Port of Dispatch: COIMBATORE

Multimeter Probes - Tweezers

Approx Price: Rs 540 / Piece 
Minimum Order Quantity: 1 Piece

Testing surface-mount components with standard test leads is anything but easy. Everyone has their own method: some people tackle it with teamwork and have a friend (or grad student) hold the probes, some people have adapted a sort of chopsticks-like technique, but the best way by far is probably just to buy these handy tweezer probes! Tweezer probes connect to your existing instrumentation with shrouded banana connectors and allow you to easily test small parts with one hand. The large plastic tweezers are easy to grip and are marked for polarity.

Dimensions: Tweezers are 6" long with 10mm open clip distance. Wire lead is 16" from tweezers to jacks.

Additional Information:
  • Item Code: BE70035

Resistor Lead Bending Tool

Approx Price: Rs 500 / Piece 
Minimum Order Quantity: 1 Piece

Description: This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with an easy and reliable way to get the exact distance between two resistor leads that you need to PTH soldering. The Resistor Lead Bending Tool is two-sided, with one side offering 0.4"-1.5" spacing for ¼ Watt resistors and the other side offering 0.5"-1.5" spacing for ½ Watt resistors.

We here at SparkFun use a lot of ¼ Watt resistors in out PTH soldering kits and have found that this tool is very handy when soldering a lot of resistors at once or over a longer period of time. To use this tool, simply insert your ¼ Watt or ½ Watt resistor into the desired spacing groove and bend the leads over the edges. It’s that simple!

Note: 1/6 Watt resistors and specific diodes can be used on this tool but you will need to make sure they are centered before attempting to bend them to your desired preference.


  • ¼ Watt Resistor Spacing: 0.4"-1.5"
  • ½ Watt Resistor Spacing: 0.5"-1.5"
  • Made from high impact ABS Plastic

Additional Information:
  • Item Code: BE70033

Retentivity Tester

Approx Price: Rs 15,000 / Piece 
Minimum Order Quantity: 1 Piece
We offer magnet sheild cover testing equipment . 

Features :

1. Provides retentivity value based on the processed / annealed component .
2. Very compact & easy to use .

Additional Information:
  • Item Code: BE40014

Solenoid - 12 - 36v

Approx Price: Rs 1,500 / Piece 
Minimum Order Quantity: 1 Piece
This solenoid is rated for 36V but they work like a charm at 12V. We’ve been controlling them with the Arduino Power Driver Shield, there’s even some example code below. With a throw of 10mm these solenoids are great for all kinds of motion applications such as actuating door latches, automating percussion instruments or just poking people.

Additional Information:
  • Item Code: BE70036

Spark Fun Soil Moisture Sensor

Approx Price: Rs 400 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Description: The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.To get the SparkFun Soil Moisture Sensor functioning all you will need is to connect the VCC and GND pins to your Arduino-based device (or compatible development board) and you will receive a SIG out which will depend on the amount of water in the soil. One commonly known issue with soil moisture senors is their short lifespan when exposed to a moist environment. To combat this, we’ve had the PCB coated in Gold Finishing (ENIG or Electroless Nickel Immersion Gold). We recommend either a simple 3-pin screw pin terminal or a 3-pin jumper wire assembly (both can be found in the Recommended Products section below) to be soldered onto the sensor for easy wiring.Note: Check the Hookup Guide in the Documents section below for assembly and weatherproofing instructions as well as a simple example project that you can put to together yourself!

Additional Information:
  • Item Code: BE70059
  • Port of Dispatch: COIMBATORE

Two Wire Voltmeter

Approx Price: Rs 200 / p 
Minimum Order Quantity: 1 p
Description:Low cost, high accuracy and precision to meet most application requirements.Low start voltage, minimum 4.5VHas reverse polarity protection, reverse does not burn.Technical Parameters:Measuring range: Red DC4.50-30.0VPower range: No additional power supplyMaximum input: DC30.0V. Note: If input voltage is higher than 30V it may permanently damage the unit.Tolerance: ±1%; greater than or equal 10V when error is ±0.3V; less than 10V when the error is ±0.10Input impedance: >100K EuroWorking current: Red <23mARefresh rate: About 300mS timeDisplay method: Three 0.36" LED digital tubeDisplay Colors: RedLead Length: 15cmDimensions: 23 x 15 x 10 mm, length X width X thickness (without mounting ears);Including installation ear length: 33mmAn installation hole: Pitch: 28mm, Aperture: 2.8mmNet weight: 4.7gGross weight: 5.3gOperating temperature: -10 °C ~ 65 °C

Additional Information:
  • Item Code: BE60117

USB Interface 125Khz EM4100 RFID Card

Approx Price: Rs 1,500 / Piece 
Minimum Order Quantity: 1 Piece


  • Material: Hard Plastic
  • USB Cable Connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP, Vista, Windows7, Mac, Linux)
  • Can read all 125Khz RFID EM4100 EM410X Card/Tag (64bits, Manchester Code)
  • Support µEM4001, 4100, or its compatible RFID, ID card.
  • Diagnostic Power LED
  • Built in operating buzzer
  • Read first 10 digits of the RFID/Proximity card.
  • Powered from USB, does not require any external power supply.
  • Authority Certification: CE

Additional Information:
  • Item Code: BE60034

Vacuum Pump - 12V

Approx Price: Rs 1,710 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)

This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts.


  • 12V motor
  • 12W operation
  • ¼" barbs
  • 0-16" Hg vacuum range

Additional Information:
  • Item Code: BE70045

XL6009 DC - DC Step Up Converter

Approx Price: Rs 210 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Specifications:-Module properties: Unfenced step-up (BOOST)The input voltage: 3-32VContinuous adjustable output voltage: 5V-35VInput current: 4 Amps (Max), no-load 18 mAmps Module size: 44.7 (mm) x 21.7 (mm) approx (just for reference, may vary depending on the manufacturer and stock available)Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)Output ripple: 50 mV (the bigger the higher the voltage, current and ripple)

Additional Information:
  • Item Code: BE60123
  • Port of Dispatch: COIMBATORE

LED - Ultraviolet

Approx Price: Rs 20 / Piece 
Minimum Order Quantity: 1 Piece

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list goes on. Please wear eye protection when using these LEDs.


  • T1 ¾ 5mm clear lens
  • 395-400nm
  • 100-180mcd
  • 3-3.6V forward drop

Additional Information:
  • Item Code: BE70049
Looking for Innovative products ?
© Bharathi Electronics
Desktop Site Back to top