Sensors

MQ-135 Air Quality Detection

Approx Price: Rs 400 / Piece 
Minimum Order Quantity: 1 Piece
  • Signal output indicator instructions;
  • Dual signal output (analog output, and TTL level output);
  • TTL output valid signal is low; (output low signal light, which can be accessed microcontroller IO port)
  • Analog output with increasing concentration, the higher the concentration, the higher the voltage;
  • Sulfide, benzene Department of steam, smoke and other harmful gases with high sensitivity;
  • Has a long life and reliable stability;
  • Rapid response recovery characteristics;

Additional Information:
  • Item Code: BE60178

Photo Electric Switch Diffused

Approx Price: Rs 975 / Piece 
Minimum Order Quantity: 1 Piece
We offer good quality Photo electric switch diffused type.

Specification :-

Operating Voltage : 10-30 VDC
Output : PNP
Sensing distance : 0- 30CM (adjustable )

Additional Information:
  • Item Code: BE20253

Ultrasonic Sensor

Approx Price: Rs 150 / Piece 
Minimum Order Quantity: 1 Piece

HC SR-04 - Product features:

Ultrasonic ranging module HC - SR04 provides 2cm - 40cm the ranging accuracy can reach to 3mm.
The modules includes ultrasonic transmitter, receiver and control circuit. The basic principle of work:

(1) Using IO trigger for at least 10us high level signal,
(2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back.
(3) IF the signal back, through high level , time of high output IO duration is the time from
sending ultrasonic to returning.Test distance = (high level time×velocity of sound (340M/S) / 2.

Easy to Interface conversion boads avilable now ( PWM TO UART , OBSTACLE) - based on PIC microcontroller

  • OBSTACLE INTEFACE BRD

  • UART & OBSTACLE O/P BRD


    Interfacing Pins:
    -> 5V Supply
    -> Trigger Pulse Input
    <- Echo Pulse Output
    -> 0V Ground

    Electric Parameters:

  • Working Voltage DC 5 V

  • Working Current 15mA

  • Working Frequency 40Hz

  • Max Range 40cm

  • Min Range 2cm

  • MeasuringAngle 15 degree

  • Trigger Input Signal 10uS TTL pulse

  • Echo Output Signal Input TTL lever signal and the range in proportion

  • Dimension 45*20*15mm

     

Obstacle Sensor

Approx Price: Rs 130 / Piece 
Minimum Order Quantity: 1 Piece
Specifications:

  • Voltage: 12 V
  • Working Temperature: 10-50 °C

Additional Information:
  • Item Code: BE30006

Heart Beat Monitor Module

Approx Price: Rs 450 / Piece 
Minimum Order Quantity: 1 Piece
We offer Heart beat monitor module .

Easy to attach with Microcontrollers.

Additional Information:
  • Item Code: BE30084

PIR Sensor

Approx Price: Rs 280 / Piece 
Minimum Order Quantity: 1 Piece
We offer PIR sensor module of parallax make.

PIR Sensor is pyroelectric device that detects motion by measuring changes in the infrared
level emitted by sour rounding object. This motion can be detected by checking for a high signal on the
i/o pin.

Features :
single bit output
small size makes it easy to conceal
Compatible with all micro controller interface.

Additional Information:
  • Item Code: BE30097

Motion Sensor

Approx Price: Rs 280 / Piece 
Minimum Order Quantity: 1 Piece
We offer motion (PIR) sensor module of  parallax make.

PIR Sensor is pyroelectric device that detects motion by measuring changes in the infrared
level emitted by sourrounding object. This motion can be detected by checking for a high signal on the
i/o pin.

Features :
single bit output
small size makes it easy to conceal
Compatible with all microcontroller interface.

Additional Information:
  • Item Code: BE30097A

Line Follower - Sensor

Approx Price: Rs 300 / Piece 
Minimum Order Quantity: 1 Piece
RedBot Sensor - Line Follower

Description: The Line Follower sensor is an add-on for your RedBot that gives your robot the
ability to detect lines or nearby objects. The sensor works by detecting reflected light coming
from its own infrared LED. By measuring the amount of reflected infrared light, it can detect
transitions from light to dark (lines) or even objects directly in front of it.
The sensor has a 3-pin header which connects directly to the RedBot Mainboard via female to
female jumper wires. Use the included RedBot library to detect lines or objects. A mounting hole
lets you easily connect one or more of these to the front or back of your robot chassis.

Dimensions: 0.32 x 1.18 " (8.22 x 30.14 mm)
Features:
  • 5VDC operating voltage
  • Mounting hole
  • 25mA supply current
  • Optimal sensing distance: 0.125" (3mm)

Additional Information:
  • Item Code: BE70011

IR Proximity Sensor 150cm Distance

Approx Price: Rs 1,300 / Piece 
Minimum Order Quantity: 1 Piece
Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F
Description: Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog
output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and
5.5VDC. The sensor has a Japanese Solder less Terminal (JST) Connector. We recommend
purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!

Additional Information:
  • Item Code: BE70004

Microphone Breakout

Approx Price: Rs 600 / Piece 
Minimum Order Quantity: 1 Piece
Breakout Board for Electret Microphone

Description: Ready to add audio to your next project? This small breakout board couples a small
electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud
enough to be picked up by a microcontroller's Analog to Digital converter. Unit comes fully
assembled as shown. Works from 2.7V up to 5.5V.

Additional Information:
  • Item Code: BE70003

Water Flow Sensor

Approx Price: Rs 500 / Piece 
Minimum Order Quantity: 1 Piece
We deal with water flow sensor which is used to measure water flow rate .

Humidity Sensor

Approx Price: Rs 400 / Piece 
Minimum Order Quantity: 1 Piece

We Deal with Humidity sensor .

 

 


Additional Information:
  • Item Code: BE30113

Humidity & Temperature Sensor (hrt393)

Approx Price: Rs 700 / Piece 
Minimum Order Quantity: 1 Piece

Humidity & Temperature sensor

Specifications:

  • Input Voltage range : DC 5.0 (+ -) 0.2V
  • Output Voltage Range : DC 1.0 - 3.0V
  • Measurement Accuracy : (+ -) 5% RH
  • Operating Current (Maximum) : 2mA
  • Storage RH Range : 0 to 99% RH
  • Operating RH Range : 20 to 95% (100% RH Intermittent)
  • Transient Condensation : <3% RH
  • Temperature Range :
    • Storage : -20°C to 70°C
    • Operating : - 0°C to 50°C
  • Hysteresis (RH @25°C) : MAX 2%RH
  • Long term Stability (Typical drift per year) : 1.5%
  • Linearity : Linearity
  • Time response (63% step change) : 1 min
  • Dimensions (L*W) : 3mm * 2mm

Additional Information:
  • Item Code: BE30114

Soil Moisture Sensor

Approx Price: Rs 450 / Piece 
Minimum Order Quantity: 1 Piece

Features 

·         Digital output, easy to adjust

·         Nickel plating to avoid corrosion

·         Working voltage: 3.3V-5V

·         On-board LM393 chip

·         Dimension of the board: 3.2cm * 1.4cm


Additional Information:
  • Item Code: BE30116

6DOF MPU-6050 3-Axis Acceleration + Gyroscope Module

Approx Price: Rs 400 / Piece 
Minimum Order Quantity: 1 Piece

Specifications:

  • On-board MPU - 6050 integrated 6 axis motion processing chip.
  • On-board LDO chip, support 5V / 3.3V voltage input.
  • Commonly used pin have eduction, pin have standard 2.54 mm spacing.
  • Module support IIC standard communication protocol for easy interfacing.
  • 16 bit AD converter that can generate 16 bits of data output.
  • Users can control the accelerator sensor range within 2g, 4g, 8g and 16g.
  • Angular velocity, Sensing range: 250 500 1000 and 2000 / SEC (DPS)

Additional Information:
  • Item Code: BE30119

Human Sense Based Room Light Control Sensors

Approx Price: Rs 1,000 / Piece 
Minimum Order Quantity: 1 Piece

Features:

  • Wide operating voltage: AC110V - 250V.
  • The extra-wide delay time adjustment: about 10 seconds - 6 minutes adjustable!
  • Adjustable sensitivity: turn on the lights during the day or night.
  • Sensing distance: 0-7 meters
  • Induction angle degrees: 110-140
  • Load Power: 1W to 200W
  • Sensing Method: Passive Infra Red

 


Additional Information:
  • Item Code: BE30120

4 Channel Capacitive Touch Switch

Approx Price: Rs 520 / Piece 
Minimum Order Quantity: 1 Piece

Specification:

  • Onboard TTP224 capacitive touch sensor IC 4 keys
  • 4 board-level status indicator
  • Working voltage: 2.4V-5.5V
  • Advanced Pins breakout, so that the output mode and working mode selectable.
  • Low power selection
  • PCB board size: 35 (mm) x29 (mm)


Additional Information:
  • Item Code: BE30122

LM2596 DC-DC Buck Converter Step-Down Power Module

Approx Price: Rs 200 / Piece 
Minimum Order Quantity: 1 Piece

Specifications:

  • Module properties: non-isolated step-down module
  • Mode of rectification: non-synchronous rectification
  • Input voltage: 4V-35V
  • Output voltage: 1.25-30V
  • Output current: 3A (MAX)
  • Size: 53mm * 26mm
  • Input mode: IN+ input positive IN- input negative
  • Output mode: OUT+ output positive OUT- output negative

Additional Information:
  • Item Code: BE30123

Temperature Sensor - Waterproof (DS18B20)

Approx Price: Rs 750 / Piece 
Minimum Order Quantity: 1 Piece

Description: This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

Dimensions: Probe is 7mm in diameter and roughly 26mm long. Overall length (including wire) is 6 feet.

Features:

  • 3.0-5.5V input voltage
  • Waterproof
  • -55°C to+125°C temperature range
  • ±0.5°C accuracy from -10°C to +85°C
  • 1 Wire interface

Additional Information:
  • Item Code: BE70026

UV Sensor Breakout - ML8511

Approx Price: Rs 1,245 / Piece 
Minimum Order Quantity: 1 Piece

Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions.

This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. It outputs a analog voltage that is linearly related to the measured UV intensity (mW/cm2). If your microcontroller can do an analog to voltage conversion then you can detect the level of UV!


Additional Information:
  • Item Code: BE70027

Capacitive Touch Sensor Breakout -MPR121

Approx Price: Rs 750 / Piece 
Minimum Order Quantity: 1 Piece

Description: This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).


Additional Information:
  • Item Code: BE70025

Gas Sensor Module With Mq3


Additional Information:
  • Item Code: BE60040

Gas Sensor Module With Mq2

Approx Price: Rs 400 / Piece 
Minimum Order Quantity: 1 Piece
This alcohol sensor module is specially designed to detect alcohol vapours in the air Specifications: Operating Voltage: 4.5V to 5V DC High sensitivity to Smoke, Propane, Butane and LPG Good sensitivity to Combustible gas in wide range On board visual indicator (LED) for indicating alarm.

Additional Information:
  • Item Code: BE60039

Tilt Sensor

Approx Price: Rs 130 / Piece 
Minimum Order Quantity: 1 Piece
Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. When the switch is level it is open, and when tilted, the switch closes. A led is provided as indicator which glows when the sensor is inclined.Specifications Operating Voltage: 3.3 V – 5 V Output indicator light High sensitivity.

Additional Information:
  • Item Code: BE60042

Gas Sensor Module With Mq6

Approx Price: Rs 400 / Piece 
Minimum Order Quantity: 1 Piece
This alcohol sensor module is specially designed to detect LPG Gas vapours in the air.Specifications: Operating Voltage: 4.5V to 5V DC High sensitivity to Propane, Butane and LPG Good sensitivity to Combustible gas in wide range Analog and Digital output available Onboard visual indicator (LED) for indicating alarm

Additional Information:
  • Item Code: BE60041

TCS230 TCS3200 Color Recognition Sensor

Approx Price: Rs 370 / Piece 
Minimum Order Quantity: 1 Piece

Description:

  • Chip: TCS230
  • Input voltage: DC 3 ~ 5V
  • Output frequency voltage: 0 ~ 5V
  • Use bright white LED lights
  • can be connected directly with Microcontroller
  • Static detection of the measured object color
  • Best detection distance: 10mm
  • PCB size: 31.6 (mm) x 24.4 (mm)

Additional Information:
  • Item Code: BE60046

Metal Detect - 1 iSensor nch Coil (Assembled)

Approx Price: Rs 350 / Piece 
Minimum Order Quantity: 1 Piece
When comes in vicinity of large metallic objects, it detects them and indicates the presence by the buzzer beeping sound.

Additional Information:
  • Item Code: BE60055

DHT11 Temperature & Humidity Sensor

Approx Price: Rs 220 / Piece 
Minimum Order Quantity: 1 Piece

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Each DHT11 sensors features extremely accurate calibration of humidity calibration chamber. The calibration coefficients stored in the OTP program memory, internal sensors detect signals in the process, we should call these calibration coefficients. The single-wire serial interface system is integrated to become quick and easy. Small size, low power, signal transmission distance up to 20 meters, making it a variety of applications and even the most demanding applications. The product is 4-pin single row pin package for convenient connection.


Additional Information:
  • Item Code: BE60050

Raindrops Detection Sensor Module

Approx Price: Rs 150 / Piece 
Minimum Order Quantity: 1 Piece

Description:

  • Sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 x 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity;
  • Comparator output, the signal is clean, waveform, driving ability over 15mA;
  • Distribution bit to adjust sensitivity;
  • Operating voltage: 3.3V-5V
  • Output form: digital switching outputs (0 and 1) and analog AO voltage output;
  • Fixed bolt hole for easy installation
  • Small board PCB size: 3.2cm x 1.4cm
  • Wide voltage LM393 comparator



Pins:

  • VCC: Positive power supply (3-5V)
  • GND: Negative one.
  • DO: TTL switching signal output
  • AO: Analog signal output

Additional Information:
  • Item Code: BE60053

Pulse Sensor /heart Beat Monitor

Approx Price: Rs 350 / Piece 
Minimum Order Quantity: 1 Piece
Heart beat sensor

Additional Information:
  • Item Code: BE60067

Mini IR Obstacle Detection Sensor

Approx Price: Rs 60 / Piece 
Minimum Order Quantity: 1 Piece

This is a multipurpose infrared sensor which can be used for obstacle sensing, fire detection, line sensing, etc and also as an encoder sensor. The sensor provides a digital output. The sensor outputs a logic one ( 5V) at the digital output when an object is placed in front of the sensor and a logic zero (0V), when there is no object in front of the sensor. An onboard LED is used to indicate the presence of an object.

Features: 

  • Range of around 25 cm
  • Input Voltage: 5V DC
  • Comes with an easy to use digital output
  • Can be used for wireless communication and sensing IR remote signals
  • Sensitivity can be adjusted using the onboard potentiometer.

Additional Information:
  • Item Code: BE60068

Magnetic Door Switch Set

Approx Price: Rs 310 / Piece 
Minimum Order Quantity: 1 Piece

his is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set on a window or door frame and the other attached to the window or door itself. When the switch set is separated from each other the contact is broken and triggers an alarm.

When each magnet piece comes within 20mm of each other they complete the circuit with the internal reed switches. Each Magnetic Door Switch set can accept a max voltage of up to 100V at 500mA. Additionally each set is housed in durable ABS plastic and, with the included screws, can easily mount to most surfaces.

Dimensions: 34 × 41 × 6.5 mm

Includes:

  • 1x Magnetic Door Switch Set
  • 4x Phillips Mounting Screw

Features:

  • Max Voltage: ≤100VDC
  • Max Current: ≤500mA
  • Max Rating: ≤10W
  • Gap: 20±5mm
  • Contact Mode: NO

Additional Information:
  • Item Code: BE70046

Magnetic Door Contact Switch

Approx Price: Rs 200 / Piece 
Minimum Order Quantity: 1 Piece
We offer Magnetc door contact switch

Additional Information:
  • Item Code: BE60008

Thermistor 10k NTC


Additional Information:
  • Item Code: BE20359

Non-Invasive Current Sensor - 30A

Approx Price: Rs 1,200 / Piece 
Minimum Order Quantity: 1 Piece

Description: This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.

This particular current sensor will measure a load up to 30 Amps which makes it great for building your own energy monitor to keep your power usage down, or even building an over-current protection device for an AC load. This sensor does not have a load resistor built in, so in most cases it will be necessary to place a resistor across the output to convert the coil’s induced current to a very small measurable voltage.


Additional Information:
  • Item Code: BE70032

Solenoid 230V AC

Approx Price: Rs 800 / Piece 
Minimum Order Quantity: 1 Piece
We deal with solenoids

Technical specification :-
  • Operating Voltage 230V AC.
  • Stroke length 15mm
  • Load pull / push Force  1Kgs

 


Additional Information:
  • Item Code: BE20352
Looking for Sensors ?
© Bharathi Electronics
 
Desktop Site Back to top